New Releases   Production   Discography   Remastering   Writing   Contact





















































For a short while, toward the end of the 78rpm era, before tape had established its ascendancy and while recordings were still being engraved into 4½ minute waxes, LP masters had to be compiled, without even basic editing techniques, by synchronising and assembling a number of 78s. Ansermet's 1948 recording of Scheherazade is perhaps the architypal example of this practice as Culshaw explains.

"
Assemble" is the right word, because up to that time Decca had no tape-machine. The only way, therefore, to make an LP from existing 78 rpm records was to try to join the end of one side to the start of the next, while the result was simultaneously recorded (or "cut") on a lacquer, revolving at 33⅓ rpm. It was a nightmare. Studio Two at West Hampstead had been converted for the operation, with a row of turn-tables along one wall. If a work occupied, say, ten 78 rpm sides then in all probability five of them would take up one side of an LP, and the problem was to get a smooth crossover from one 78 rpm side to the next. I stood there with a score and began a countdown during the last thirty seconds of a side and then shouted "Drop!", at which point one engineer would fade out the side that had just ended while another, with luck, would lower the pick-up on the beginning of the next side. If anything went even slightly wrong there was nothing to do but go back to the beginning, and as every LP had to be cut at least twice in case of an accident during processing at the factory it was a tedious and frustrating business. To this day I cannot hear Bartok's Concerto for Orchestra or Rimsky-Korsakov's Scheherazade with any pleasure, because I was satiated with them during those dubbing sessions; indeed, if I catch one of them inadvertently in the concert hall, it is all I can do to stop myself from leaping up and shouting "Drop!" as each familiar joining point approaches. There were days on end, including weekends, when dubbing went on from nine in the morning until after eleven at night, with only a couple of brief breaks for a sandwich. Eventually, respite came in the form of a tape-machine, which enabled us to copy the 78 rpm sides on tape without attempting to join them; the tape was then edited to give a continuous performance of the music and the result was then dubbed at 33rpm."*

Joining these transfers digitally took but a few moments. *
I

* p83 Putting the Record Straight - The Autobiography of John Culshaw. Viking Press New York




New Releases   Production   Discography  Remastering  Writing  Contact